Tile installation in Centennial is planned as a durable finish system, not as a cosmetic layer laid over unanswered questions. Apollo Construction begins with the room, substrate, water exposure, planned changes, responsible authority, and permit holder so the selected tile is supported by a buildable sequence.
This guide is for planning. It does not replace the issued permit, the authority having jurisdiction, or a manufacturer’s written system instructions. We confirm the final scope before demolition because a tile-only replacement and a bathroom remodel can have different local requirements.
Centennial applies the 2021 I-Codes plus the 2023 NEC
Centennial lists the 2021 IBC, IRC, IPC, IMC, IFGC, IFC, IEBC, IECC, and ISPSC, with the 2023 NEC and other local codes. That is the declared code context for a bathroom scope.
Centennial requires a permit when electrical, gas, mechanical, or plumbing systems are involved
The City states that a permit is required where work involves any electrical, gas, mechanical, or plumbing system. Tile-only planning separates those systems from the visible finish before calling a scope simple.
Centennial requires City contractor licensing before work begins
The Building Division requires contractors to be licensed through the City before working within its boundaries. General, mechanical, and roofing contractors are not state licensed; electrical and plumbing contractors are state licensed.
Centennial trade contractor classes include flooring
Centennial’s trade contractor license classes cover flooring among other trades. Apollo Construction does not claim that credential here; the project verifies the appropriate licensed permit holder.
Centennial separates tile layout from system changes
A floor pattern or shower-wall selection does not answer whether a drain, valve, fan, wiring, or gas-adjacent system changes. Those conditions are identified before the permit path and final assembly are set.
Centennial substrate planning considers expansive-soil movement
Rigid tile needs a stable, prepared surface. We record slab cracks and moisture history and use compatible movement accommodation rather than expecting grout to manage building movement.
Tile Work Near Centennial
Apollo Construction plans bathroom floors, shower walls, tub surrounds, kitchen backsplashes, entry tile, laundry floors, fireplace surrounds, and transitions as construction assemblies. The visible tile is the last layer. The work begins with the existing substrate, moisture route, room use, tile size, layout, adjacent finishes, and the actual permit boundary. That makes a planning range more useful than a finish allowance that ignores the parts soon to be hidden.
Substrate and flatness
Tile needs a clean, stable, appropriately prepared surface. On a wood floor we look for stiffness, damaged framing, unsupported edges, fasteners, and height transitions. On a slab we look for cracks, moisture evidence, patch history, curl, and changes in elevation. The selected mortar, underlayment, membrane, or leveling product must be compatible with both the substrate and the tile format. Large-format tile makes flatness especially consequential because small departures can create lippage or weak coverage.
Movement, cracks, and transitions
Colorado’s expansive-soil conditions make movement planning practical, not decorative. A stable hairline surface crack is different from vertical displacement, recurring movement, water entry, or evidence of structural distress. We document what is visible and select crack isolation, uncoupling, soft joints, or perimeter movement accommodation only where the system and condition support it. A membrane cannot correct a wet slab, active movement, or insufficient floor structure. Doorways, dissimilar materials, cabinets, tubs, curbs, and fixed walls are considered before layout begins.
Shower waterproofing before finish work
Tile and grout are not the water-control layer in a shower. The shower relies on a compatible, continuous waterproof assembly with deliberate drain, corner, curb, niche, bench, and penetration details. The shower liner is water-tested before tile goes over it. We keep system components together rather than combining unrelated board, membrane, drain, mortar, grout, and sealant products. That disciplined sequence makes it easier to locate responsibility, preserve drainage, and avoid covering an unresolved detail.
Layout, setting, and finishing
Before setting tile, we establish focal lines, cut locations, drain position, joint pattern, trim, edge profile, and transitions to adjoining rooms. The layout is checked against doors, cabinets, plumbing trim, fixtures, and lighting so a small starting error is not repeated across the room. Mortar coverage, trowel selection, back-buttering when called for, cure time, grout choice, and flexible sealant at appropriate change-of-plane locations are selected for the material and environment. The aim is a durable assembly with a clean visual order, not simply a fast cover-up.
Planning ranges, changes, and closeout
Costs are discussed as planning ranges and estimates, never quotes, based on dimensions, tile and trim, demolition and disposal, access, layout complexity, substrate correction assumptions, waterproofing, fixtures, transitions, permit administration, and cleanup. If removal reveals damage, moisture, inadequate backing, or a different construction condition, we document the finding and explain its planning effect before proceeding. Closeout includes protection, a review of grout and sealant locations, cleanup within scope, and care guidance for the selected finishes.
For Centennial projects, field coordination also includes protection of adjacent finishes, staging, daily cleanup, access to the occupied home, fixture delivery, and the sequence of plumbing and electrical completion. Layout is approved before mortar is mixed, and any condition found after demolition is made visible before it affects the planned assembly or cost range.
Tile Work in Other Front Range Cities
Apollo handles tile work across the Front Range. Each city page below covers that city’s own permit office, code edition and local conditions.
- Tile Work in Arvada
- Tile Work in Aurora
- Tile Work in Boulder
- Tile Work in Castle Rock
- Tile Work in Denver
- Tile Work in Englewood
- Tile Work in Highlands Ranch
- Tile Work in Lakewood
- Tile Work in Littleton
- Tile Work in Parker
- Tile Work in Thornton
- Tile Work in Westminster
- Tile Work in Colorado Springs
- Tile Work in Longmont
- Tile Work in Golden
- Tile Work in Wheat Ridge
- Tile Work in Lone Tree
- Tile Work in Erie
- Tile Work in Castle Pines
- Tile Work in Lafayette
- Tile Work in Louisville
- Tile Work in Greenwood Village
- Tile Work in Commerce City
- Tile Work in Northglenn
- Tile Work in Superior
- Tile Work in Evergreen
- Tile Work in Ken Caryl
- Tile Work in Cherry Hills Village
- Tile Work in Monument
- Tile Work in Federal Heights
- Tile Work in Sheridan
- Tile Work in Edgewater
- Tile Work in Morrison
- Tile Work in Columbine Valley
- Tile Work in Manitou Springs
- Tile Work in Glendale
- Tile Work in Elizabeth
- Tile Work in Idaho Springs
- Tile Work in Black Forest
- Tile Work in Falcon & Peyton
- Tile Work in Franktown
- Tile Work in Georgetown
- Tile Work in Empire
- Tile Work in Palmer Lake
- Tile Work in Larkspur
- Tile Work in Foxfield
- Tile Work in Sedalia
- Tile Work in Byers
- Tile Work in Black Hawk
- Tile Work in Central City
- Tile Work in Rollinsville
- Tile Work in Cripple Creek
- Tile Work in Victor
- Tile Work in Broomfield
Other Apollo Services in Centennial
Apollo runs every trade below in Centennial with its own crews and its own permit handling, so a project that crosses trades stays with one contractor.
- Kitchen Remodeling in Centennial — layout, cabinetry, counters, plumbing and electrical coordination
- Bathroom Remodeling in Centennial — showers, tubs, vanities, tile and waterproofing
- Basement Finishing in Centennial — egress, framing, insulation, permits and finish work
- Home Additions in Centennial — room additions, bump-outs, structural and permit planning
- Roofing in Centennial — replacement, repair, storm damage and ventilation
- Siding in Centennial — fiber cement, LP and vinyl siding, full re-side
- Concrete in Centennial — driveways, patios, walkways, flatwork and repair
- Deck Building in Centennial — wood and composite decks, railings and permits
- Fencing in Centennial — wood, composite and metal fence installation
- Framing in Centennial — structural framing, walls, load-bearing changes
- Drywall in Centennial — hang, tape, texture, repair and patching
- Painting in Centennial — interior and exterior, prep and finish work
- Demolition in Centennial — selective interior demo and full teardowns
Related Pages
Common Questions
Can new tile be installed over old tile?
Only after the existing finish, bond, height, flatness, moisture condition, and transitions are assessed. Removing the old layer often provides the clearer view of the substrate and makes it possible to correct hidden defects. The decision follows the actual assembly, not a blanket rule.
Why do tile floors crack?
Cracks can reflect substrate movement, insufficient stiffness, moisture, poor preparation, restraint at a perimeter, or a missing movement detail. We look at the crack pattern and building condition before recommending a repair or membrane.
What matters most in a shower tile installation?
The waterproof assembly, drainage, penetrations, substrate, and compatible system details matter before the selected tile and grout. Tile is installed only after those layers are properly prepared.
How are tile costs planned?
We combine measurements, tile selection, demolition, access, substrate and waterproofing assumptions, layout, trim, fixture coordination, permit administration, and cleanup into a planning range. It is refined as the site and scope become known.
Can Apollo Construction coordinate tile with a full bathroom remodel?
Yes. Coordinating fixtures, plumbing, electrical, ventilation, backing, waterproofing, tile, and transitions as one sequence helps prevent finish work from being opened again for an unresolved concealed decision.
Talk to Us About Your Project
Tell Apollo Construction the address, room, intended tile, fixture changes, approximate dimensions, and what is failing now. Photos of the shower, floor, transitions, and visible cracks help identify the likely assembly and permit conversation. We will turn that information into a responsible planning range and next step.
Ready to price this service?
Start with our quick estimate. Share the room, materials, and known scope, and we will prepare a tile-work planning conversation for Centennial.